LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Secondary Pressure Sensor >> Inspection

Secondary Pressure Sensor: Inspection

  1. Remove the instrument panel lower cover. Refer to REMOVAL .
  2. Start and warm up the engine.
  3. Shift the select lever to "P" or "N" range.
  4. Depress the brake pedal and hold it.
  5. Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. Refer to OPERATION .

    Standard 

    Approx. 0.8 V 

  6. Check "secondary pressure sensor voltage" with engine stopped and ignition switch turned on by using Subaru Select Monitor. Refer to OPERATION .

    Specification: 

    Approx. 0.5 V 

scientia non olet · About LEMON Manuals