LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle & Differential >> Transfer Drive Gear >> Disassembly

Transfer Drive Gear: Disassembly

  1. Remove the snap ring.
    Fig 1: Identifying Snap Ring
    G06652329Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing.
    NOTE: Do not reuse the ball bearing.

    ST 899864110 REMOVER

    Fig 2: Removing Ball Bearing Using Remover
    G06652330Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the snap ring from transfer drive gear, and remove the needle bearing.
scientia non olet · About LEMON Manuals