|
|
899524100 |
PULLER SET |
Used for removing the front differential roller bearing.
- Puller
- Cap
|
|
|
399780104 |
WEIGHT |
Used for adjusting preload on the front differential roller bearing. |
|
|
498077000 |
REMOVER |
- Used for removing the roller bearing of the drive pinion shaft.
- Used for removing the transfer driven gear taper roller bearing.
|
|
|
498077600 |
CENTER DIFFERENTIAL BEARING REMOVER |
Used for removing the center differential ball bearing. |
|
|
498147001 |
DEPTH GAUGE |
Used for adjusting the extension end play and main shaft end play. |
|
|
498247001 |
MAGNET BASE |
- Used for measuring the backlash of bevel pinion gear and hypoid gear.
- Used together with DIAL GAUGE (498247100).
|
|
|
498247100 |
DIAL GAUGE |
- Used for measuring the backlash of bevel pinion gear and hypoid gear.
- Used together with MAGNET BASE (498247001).
|
|
|
18667AA020 |
HOLDER |
- Used for removing and installing the drive pinion shaft lock nut.
- Used for measuring the backlash of hypoid gear.
- Used for adjusting preload on the front differential roller bearing.
|
|
|
498937000 |
TRANSMISSION HOLDER |
Used for removing and installing the main shaft lock nut. |
|
|
499277100 |
BUSHING 1-2 INSTALLER |
- Used for installing the drive pinion shaft washer.
- Used for installing the front differential roller bearing outer race.
|
|
|
499277200 |
INSTALLER |
- Used for installing the 2nd driven gear bushing, roller bearings, 3rd-4th driven gear, 5th driven gear and the 6th driven gear.
- Used for installing the drive pinion shaft washer.
|
|
|
927640000 |
INSTALLER |
Used for installing the roller bearing (transfer case side) of transfer driven gear. |
|
|
18630AA010 |
WRENCH COMPL RETAINER |
- Used for removing and installing the differential side retainer.
- Used for adjusting preload on the front differential roller bearing.
- WRENCH COMPL RETAINER (18630AA020) can also be used.
|
|
|
18722AA000 |
REMOVER |
Used for removing the 5th drive gear and 6th drive gear. |
|
|
499877000 |
RACE 4-5 INSTALLER |
- Used for installing the 4th, 5th and 6th drive gear needle bearing races and the main shaft double taper roller bearings.
- Used together with REMOVER (899714110).
|
|
|
499917500 |
DRIVE PINION GAUGE ASSY |
Used for adjusting the drive pinion shaft shim. |
|
|
499927100 |
HANDLE |
Used for backlash measurement of the hypoid gear and preload adjustment of the front differential roller bearing. |
|
|
499937100 |
TRANSMISSION STAND |
Used for disassembling and assembling the transmission. |
|
|
499987003 |
SOCKET WRENCH (35) |
Used for removing and installing the main shaft lock nut. |
|
|
499987300 |
SOCKET WRENCH (50) |
Used for removing and installing the driven shaft lock nut. |
|
|
899714110 |
REMOVER |
Used for removing and installing the parts of main shaft and driven shaft. |
|
|
899864100 |
REMOVER |
- Used for removing the parts of the main shaft.
- Used for removing the transfer driven gear roller bearing (transfer case side) and for installing it (extension case side).
- Used for removing the transfer drive gear ball bearing.
|
|
|
18680AA020 |
HOLDER |
- Used for removing and installing the drive pinion shaft lock nut.
- Used for removing and installing the driven shaft lock nut.
|
|
|
899904100 |
STRAIGHT PIN REMOVER |
Used for removing and installing the straight pin. |
|
|
398497701 |
ADAPTER |
- Used for installing the front differential roller bearing.
- Used together with BUSHING 1-2 INSTALLER (499277100).
|
|
|
498057300 |
INSTALLER |
Used for installing the extension case oil seal. |
|
|
498255400 |
PLATE |
Used for measuring the hypoid gear backlash. |
|
|
398527700 |
PULLER ASSY |
- Used for removing the extension case oil seal.
- Used for removing the front differential side retainer bearing outer race.
- Used for removing the front differential side retainer oil seal.
|
|
|
398643600 |
GAUGE |
Used for adjusting the extension end play. |
|
|
398177700 |
INSTALLER |
- Used for installing the transfer drive gear ball bearing.
- Used for installing the 4th drive gear needle bearing race.
|
|
|
498175500 |
INSTALLER |
Used for installing the roller bearing of transfer driven gear (extension case side). |
|
|
28399SA010 |
OIL SEAL PROTECTOR |
Used for protecting the oil seal from damage when inserting the front drive shaft. |
|
|
18675AA000 |
DIFFERENTIAL SIDE OIL SEAL INSTALLER |
Used for installing the front differential side retainer oil seal. |
|
|
398791700 |
SPRING PIN REMOVER 2 |
Used for installing and removing the spring pin. |
|
|
18662AA010 |
SOCKET (27) |
Used for removing and installing the drive pinion shaft lock nut. |
|
|
899754112 |
PRESS |
- Used for removing driven shaft parts.
- Used to install the main shaft ball bearing.
|
|
|
18631AA000 |
HANDLE |
Used for installing transfer case assembly and extension case assembly. |
|
|
18762AA000 |
COMPRESSOR SPECIAL TOOL |
Used for removing the 1st driven gear. |
|
|
18654AA000 |
INSTALLER |
Used for installing the 2nd driven gear bushing. |
|
|
18657AA000 |
INSTALLER |
Used for installing the transfer case oil seal. |
|
|
41099AJ130 |
SPECIAL TOOL FB |
Used for removing and installing transmission. |
|
|
99099AJ000 |
ENGINE HANGER |
- Used for removing and installing transmission.
- Used together with CHAIN BALANCER (99099AJ010) and sling chain (general tool).
|
|
|
99099AJ010 |
CHAIN BALANCER |
- Used for removing and installing transmission. (Weight of 350 kg (772 lb) is supported)
- Used together with ENGINE HANGER (99099AJ000) and sling chain (general tool).
- Used to hang the engine while balancing it with the sling chain inserted in this tool.
|
|
|
498267200 |
CYLINDER HEAD TABLE |
Used for installing and removing the roller bearing of the transfer case. |
|
|
498267300 |
CYLINDER HEAD TABLE |
Used for installing and removing the roller bearing of the transfer case. |
|
|
18763AA000 |
COMPRESSOR SHAFT |
Used for installing and removing the needle bearing of the transfer case. |
|
|
498277200 |
STOPPER SET |
- Used for installing the needle bearing of the transfer case.
- Use only the spacer.
|