Solenoid Unit

Remove the AT select lever. Refer to REMOVAL .
Remove the spacer and gasket. Refer to DISASSEMBLY .
Using a flat tip screwdriver with a thin tip, remove the harness connector from the plate COMPL.

Fig 1: Locating Plate COMPL Harness Connector
Courtesy of SUBARU OF AMERICA, INC.
Raise the claw using a flat tip screwdriver with a thin tip, and remove the solenoid unit from the plate COMPL.

Fig 2: Removing Solenoid Unit From Plate COMPL Using Flat Tip Screwdriver
Courtesy of SUBARU OF AMERICA, INC.
Using a flat tip screwdriver with a thin tip, remove the solenoid unit terminals from the harness connector.

Fig 3: Removing Solenoid Unit Terminals From Harness Connector Using Flat Tip Screwdriver
Courtesy of SUBARU OF AMERICA, INC.