LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Continuously Variable Transaxle (CVT)) >> General Description >> Preparation Tool >> Special Tool

Special Tool

WARNING: This page is about a different variant/trim than selected.
ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G08581895
 41099AJ130 (Newly adopted tool) SPECIAL TOOL FB Used for holding and balancing the engine unit.
G06654300
 99099AJ000 ENGINE HANGER
  • Used for removing and installing the automatic transmission assembly.
  • Used together with CHAIN BALANCER (99099AJ010).
G06654301
 99099AJ010 CHAIN BALANCER
  • Used for removing and installing the automatic transmission assembly.
  • Used together with ENGINE HANGER (99099AJ000).
G08317640
 18769AA010 EXPANDER PULLEY Used for removing and installing the secondary pulley assembly.
G08317641
 18767AA010 BEARING REMOVER Used for removing the ball bearing of transfer clutch assembly.
G08317642
 18762AA010 COMPRESSOR SPECIAL TOOL Used for removing and installing snap ring of forward clutch assembly.
G08317643
 18761AA010 SHEET SPECIAL TOOL
  • Used for removing and installing control valve body.
  • Used for removing and installing valve cover.
  • Used for removing and installing transmission harness.
G08317644
 18681AA010 PRESSURE GAUGE ADAPTER Used for measuring the secondary pressure (line pressure).
NOTE: Used together with the genuine O-ring (part No. 806916050).
G07913243
 18801AA000 OIL PRESSURE GAUGE ASSY Used for measuring the secondary pressure (line pressure).
G06651903
 18658AA020 WRENCH COMPL RETAINER Used for removing and installing the differential side retainer.
G05032873
 34099AC020 ADAPTER HOSE B Used for measuring the transfer clutch hydraulic pressure.
NOTE: Used with genuine union screw (Part No. 801914010) and gasket (Part No. 803914060).
G05032872
 34099AC010 ADAPTER HOSE A Used for measuring the transfer clutch hydraulic pressure.
G07913245
 18681AA000 PRESSURE GAUGE ADAPTER Used for measuring the transfer clutch hydraulic pressure.
NOTE: Used together with the genuine O-ring (part No. 806911080).
G05002425
 498575400 OIL PRESSURE GAUGE ASSY Used for measuring the transfer clutch hydraulic pressure.
G04997553
 498277200 STOPPER SET
  • Used for removing and installing transmission assembly to engine.
  • Used for preventing the torque converter from dropping off.
G05002431
 398527700 PULLER ASSY
  • Used for removing the extension case oil seal.
  • Used for removing the bearing of reduction driven gear.
  • Used for removing the bearing outer race of the drive pinion shaft.
G05002438
 398673600 COMPRESSOR Used for removing and installing snap ring of forward clutch assembly.
G05667732
 18355AA000 PULLEY WRENCH
  • Used for removing and installing the lock nut of reduction driven gear.
  • Used together with PIN SET (18334AA000).
G05667733
 18334AA000 PIN SET
  • Used for removing and installing the lock nut of reduction driven gear.
  • Used together with PULLEY WRENCH (18355AA000).
G05002932
 499987003 SOCKET WRENCH (35) Used for removing and installing the lock nut of reduction driven gear.
G05002432
 498057300 OIL SEAL INSTALLER Used for installing the extension case oil seal.
G05003188
 18632AA000 STAND ASSY Used for disassembling and assembling the transmission.
G05343003
 498515500 REMOVER Used for removing the bearing inner race of the drive pinion shaft.
G05002439
 498255400 PLATE Used for measuring the backlash of hypoid gear.
G05002441
 498247001 MAGNET BASE
  • Used for measuring the backlash of differential bevel pinion gear.
  • Used for measuring the backlash of hypoid gear.
  • Used together with DIAL GAUGE (498247100).
G05002442
 498247100 DIAL GAUGE
  • Used for measuring the backlash of differential bevel pinion gear.
  • Used for measuring the backlash of hypoid gear.
  • Used together with DIAL GAUGE (498247101).
G05002460
 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER Used for installing the differential side retainer oil seal.
G05022174
 18762AA000 COMPRESSOR SPECIAL TOOL Used for disassembling and installing the multi-plate clutch piston.
G08317666
 927720000 HOUSING BUSHING INSTALLER AND REMOVER
  • Used for installing the oil seal.
  • Use BUSHING SHAFT (927880000).
G05022166
 18763AA000 COMPRESSOR SHAFT Used for measuring the backlash of hypoid gear.
G05002461
 28399SA010 OIL SEAL PROTECTOR Used for protecting oil seal when installing front drive shaft.
G05002455
 498937110 HOLDER
  • Used for removing and installing the drive pinion lock nut.
  • Used as a holder to rotate gear when checking tooth contact.
G06338208
 18270KA020 SOCKET (E20)
  • Used for removing and installing the hypoid driven gear.
  • Used for removing and installing the drive pinion shaft retainer.
G05002462
 398497701 SEAT Used for removing and installing the bearing.
G05002948
 398177700 INSTALLER
  • Used for installing the ball bearing.
  • Used for installing the parking gear.
  • Used for installing the bearing outer race.
  • Used for installing the plug.
G08317675
 28499TC010 PRESS SNAP RING
  • Used for installing the ball bearing of the transmission case.
  • Used for installing the bearing outer race of drive pinion shaft.
G05002935
 899864100 REMOVER
  • Used for removing and installing the ball bearing.
  • Used for removing the parking gear and transfer drive gear.
  • Used for removing the bearing inner race of the front differential.
G05002433
 498077000 REMOVER Used for removing the bearing inner race of the front differential.
G05003190
 18657AA010 INSTALLER Used for installing the oil seal at shifter arm shaft portion.
G05002454
 498077600 REMOVER Used for removing the ball bearing of drive sprocket.
G05003213
 18723AA000 REMOVER Used for removing the ball bearing of transfer clutch assembly.
G05022169
 18854AA000 ANGLE GAUGE
  • Used for installing the hypoid driven gear.
  • Used for installing the drive plate.
G07665421
 498497300 CRANKSHAFT STOPPER Used for stopping the drive plate rotation when removing and installing the drive plate.
G07913281
 399513600 INSTALLER Used for removing the ball bearing of drive sprocket.
G05002445
 499267300 STOPPER PIN Used for adjusting the inhibitor switch.
G05002922
 499277100 BUSHING 1-2 INSTALLER
  • Used for installing the bearing of the transmission case.
  • Used for installing the ball bearing.
  • Used for installing the bearing inner race.
G05002923
 499277200 INSTALLER Used for installing the ball bearing of the transfer clutch assembly.
G05022173
 499575400 GAUGE Used for measuring height of end play.
G05003181
 499575500 GAUGE Used for measuring height of end play.
G05002447
 499787500 ADAPTER
  • Used for removing and installing the drive pinion shaft lock nut.
  • Used for measuring the preload of the drive pinion shaft.
  • Used for measuring the backlash of hypoid gear.
G06654336
 499575600 GAUGE Used for measuring height of end play.
G05002446
 499787700 WRENCH
  • Used for removing and installing the drive pinion shaft lock nut.
  • Used for measuring the preload of the drive pinion shaft.
  • Used for measuring the backlash of hypoid gear.
G05002924
 499757002 INSTALLER
  • Used for removing the bearing of reduction driven gear.
  • Used for installing the parking gear.
  • Used for installing the transfer drive gear.
G05002459
 899580100 INSTALLER
  • Used for installing the collar of reduction driven gear.
  • Used for installing the ball bearing of the transfer drive gear.
  • Used for installing the bearing inner race of drive pinion shaft.
G05002916
 498077300 REMOVER Used for installing the ball bearing of reduction driven gear.
G05022175
 499755602 PRESS SNAP RING
  • Used for installing the oil seal.
  • Used for installing the ball bearing and roller bearing.
  • Used for installing the plug.
G05002944
 498077400 REMOVER Used for removing the ball bearing of transfer driven gear.
G05342871
 20099AE020 INSTALLER Used for installing the bearing outer race of drive pinion shaft.
G08317698
 927130000 EXTENSION DRIVE SHAFT Used for installing the bearing inner race of drive pinion shaft.
G07910019
 1B022XU0 SUBARU SELECT MONITOR III KIT Used for troubleshooting the electrical system.
scientia non olet · About LEMON Manuals