LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transaxle) >> Center Differential Carrier >> Removal

Center Differential Carrier: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. Refer to REMOVAL .
  2. Remove the rear vehicle speed sensor, and separate the extension case from transmission case. Refer to REMOVAL .
  3. Extract the rear drive shaft. Refer to REMOVAL .
  4. Pull out the center differential carrier assembly.
    Fig 1: Identifying Center Differential Carrier Assembly
    G05022319Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the shim from the transmission case.
scientia non olet · About LEMON Manuals