LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Cooling System (H6DO)) >> Engine Coolant >> Inspection

Engine Coolant: Inspection

WARNING: This page is about a different variant/trim than selected.
NOTE: When adding the engine coolant, always use SUBARU Super Coolant.
  1. Park the vehicle on a level surface.
  2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant.
    1. Make sure the engine coolant level in the reservoir tank is between "FULL" and "LOW" with the engine in a cold condition.
    2. Open the radiator cap and make sure that the radiator is filled with the engine coolant up to its filler neck position.
scientia non olet · About LEMON Manuals