LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Intake System (Induction) (H6DO)) >> Air Cleaner Element >> Installation

Air Cleaner Element: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.

CAUTION: Be sure to use SUBARU genuine air cleaner element depending on the engine type when replacing the air cleaner elements. Using other air cleaner element may affect the engine performance.
NOTE:
  • Check that there are no foreign objects in the air cleaner case.
  • When installing the air cleaner case (rear), align the protrusion of the air cleaner case (rear) to the hole on the air cleaner case (front) to install.

Tightening torque: 

3 N.m (0.3 kgf-m, 2.2 ft-lb) 

Fig 1: Locating Air Cleaner Case Hose Fixing Clamp
G06651449Courtesy of SUBARU OF AMERICA, INC.