LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Starting System & Charging System (H6DO)) >> Battery >> Removal

Section 12 (Starting System & Charging System (H6DO)): Battery: Removal

WARNING: This page is about a different variant/trim than selected.
  1. After disconnecting the battery ground terminal, remove the terminal cover, then disconnect the positive terminal.
  2. Remove the battery cable holder from the battery rod.
  3. Remove the flange nut from battery rod and remove battery holder.
    Fig 1: Locating Battery Holder Mounting Nuts
    G06648717Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the battery.
scientia non olet · About LEMON Manuals