Sunroof Motor: Installation
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When installing the sunroof motor assembly, be careful not to move the sunroof cable.
- Install the sunroof motor.
- Connect the sunroof motor connector, and connect the ground cable to battery.
- Reset the sunroof motor. < Refer to ADJUSTMENT , Sunroof Motor. >
- Check the sunroof operation as follows:
Inspection order Switch position (1) Sunroof closes completely. Close (2) Sunroof opens 500 mm (19.7 in) away from completely closed position. Open (3) Sunroof opens completely. Open (4) Sunroof closes 200 mm (7.87 in) in front of the completely closed position. Close (5) Sunroof closes completely. Close - Install the roof trim. < Refer to INSTALLATION , Roof Trim. >