DTC 2A ODS Calibration Error: DTC Detecting Condition
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
System calibration (Rezeroing) was not completed properly.
| Step | Check | Yes | No |
|---|---|---|---|
| 1 PERFORM RE-ZEROING. Perform system calibration using the Subaru Select Monitor. < Refer to SYSTEM CALIBRATION (REZEROING) . > |
Did the system calibration complete properly? | Finish the diagnosis. | Follow the system calibration procedures. < Refer to SYSTEM CALIBRATION (REZEROING) . > |