Mode $06
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
Refer to diagnostic value of troubleshooting and data of test limit indicated on the support data bit sequence table. A list of the support data is shown in the following table.
NOTE:
Some items are not displayed according to specifications.
| OBDMID | TID | SID | Diagnostic item |
|---|---|---|---|
| $01 | $84 | $1E | A/F sensor range failure (Bank 1 Sensor 1) |
| $85 | $1E | ||
| $86 | $20 | A/F sensor response failure (Bank 1 Sensor 1) | |
| $91 | $20 | ||
| $92 | $10 | ||
| $A3 | $20 | ||
| $A4 | $10 | ||
| $AC | $10 | ||
| $AD | $10 | ||
| $AE | $10 | ||
| $AF | $10 | ||
| $CD | $20 | ||
| $CF | $20 | ||
| $DF | $10 | ||
| $02 | $07 | $0B | Oxygen sensor drop failure (Bank 1 Sensor 2) |
| $08 | $0B | ||
| $A5 | $0B | ||
| $05 | $10 | Oxygen sensor response failure (Bank 1 Sensor 2) | |
| $06 | $10 | ||
| $BD | $10 | ||
| $D1 | $10 | Oxygen sensor delay failure (Bank 1 Sensor 2) | |
| $D2 | $01 | ||
| $21 | $89 | $20 | Catalyst deterioration diagnosis (Bank 1) |
| $31 | $8A | $FD | EGR system diagnosis |
| $35 | $8B | $9D | VVT monitor (Bank 1) |
| $8C | $9D | ||
| $8D | $9D | ||
| $8E | $9D | ||
| $D3 | $9D | ||
| $D4 | $9D | ||
| $D5 | $9D | ||
| $D6 | $9D | ||
| $36 | $8B | $9D | VVT monitor (Bank 2) |
| $8C | $9D | ||
| $8D | $9D | ||
| $8E | $9D | ||
| $D3 | $9D | ||
| $D4 | $9D | ||
| $D5 | $9D | ||
| $D6 | $9D | ||
| $3C | $96 | $FE | Evaporative emission control system (0.02 inch leak) |
| $C1 | $FE | ||
| $C2 | $FE | ||
| $C3 | $FE | ||
| $C4 | $FE | ||
| $C5 | $FE | ||
| $C6 | $35 | ||
| $C7 | $FE | ||
| $C8 | $FE | ||
| $C9 | $FE | ||
| $CA | $FE | ||
| $3D | $98 | $FE | Evaporative emission control system (Purge flow) |
| $CB | $35 | ELCM purge flow | |
| $CC | $FE | ||
| $41 | $9B | $14 | A/F sensor heater characteristics failure (Bank 1 Sensor 1) |
| $42 | $A2 | $24 | Oxygen sensor heater characteristics failure (Bank 1 Sensor 2) |
| $A1 | $0B | $24 | Misfire monitoring (All cylinders) |
| $0C | $24 | ||
| $A2 | $0B | $24 | Misfire monitoring (#1 cylinder) |
| $0C | $24 | ||
| $A3 | $0B | $24 | Misfire monitoring (#2 cylinder) |
| $0C | $24 | ||
| $A4 | $0B | $24 | Misfire monitoring (#3 cylinder) |
| $0C | $24 | ||
| $A5 | $0B | $24 | Misfire monitoring (#4 cylinder) |
| $0C | $24 | ||
| $E2 | $D7 | $1E | Imbalance diagnostics |
| $D8 | $1E | ||
| $D9 | $07 | ||
| $DA | $07 | ||
| $DB | $24 | ||
| $DC | $24 | ||
| $DD | $03 | ||
| $DE | $03 |