AWD Transfer Clutch Control
WARNING: This page is about a different car, the 2013 Subaru Forester, 2012 Subaru Forester, 2011 Subaru Forester, and 2010 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
| Type of control |
Regulates transfer clutch pressure in response to engine torque, throttle position and vehicle speed. |
| Gear position |
1st thru 4th and reverse |
| Remarks |
|
| Type of control |
Regulates transfer clutch pressure in accordance with the amount of slip. |
| Gear position |
1st thru 4th and reverse |
| Remarks |
Release:
Released when the amount of slip becomes smaller than the specified value. |
| Type of control |
Decreases transfer clutch pressure upon detection of a turn. |
| Gear position |
1st thru 4th and reverse |
| Remarks |
- |
| Type of control |
Regulates to the specified transfer clutch pressure quickly when the ABS signal is input. |
| Gear position |
1st thru 4th and reverse |
| Remarks |
- |
| Type of control |
Regulates to the specified transfer clutch pressure immediately after a P or N range signal is input. |
| Gear position |
P and N |
| Remarks |
- |