LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (H4DO) >> Oil Pressure Switch >> Removal

Oil Pressure Switch: Removal

CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emitting smoke or causing a fire.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting/connecting Ground Cable From Battery
    G08579605Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the terminal from oil pressure switch.
    Fig 2: Locating Oil Pressure Switch Terminal
    G08580524Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the oil pressure switch.
    CAUTION: Catch the engine oil using cloth to prevent it from splashing.
    Fig 3: Locating Oil Pressure Switch
    G08580525Courtesy of SUBARU OF AMERICA, INC.