LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Impact Sensor >> Removal

Impact Sensor: Removal

  1. Remove the key from ignition switch.
  2. Close all the doors and rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Disconnect the ground cable from battery.
  5. Remove the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
scientia non olet · About LEMON Manuals