LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System - Mechanism & Function >> Wiper and Washer Systems >> General >> Front Washer System

Front Washer System

  1. The front washer system consists of a washer tank, motor and pump unit, and a pair of nozzles.
  2. The washer tank is installed behind the front bumper under the left headlight.
  3. The washer motor and pump unit is installed at the bottom of the washer tank.
  4. The washer nozzles are installed to the front hood at its rear end and from the under side. Each nozzle has a spray hole.
  5. Each washer nozzle has a check valve at a location approximately 100 mm (3.94 in) from the nozzle.
  6. The washer tank is filled to its specified capacity when the fluid level is at the "FULL" mark on the filling pipe. Do not fill washer fluid until its level exceeds the "FULL" mark. The fluid may spill during driving or when replacing the head light bulb.
scientia non olet · About LEMON Manuals