LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security And Locks - Keyless Access (W/Push Button Start) (Diagnostics) >> General Diagnostic Table >> Inspection >> Immobilizer System

Immobilizer System

Symptoms Note
Engine does not start. < Refer to ENGINE DOES NOT START , INSPECTION, Diagnostics with Phenomenon. >
< Refer to DTC B2784 ANTENNA COIL FAULT , Diagnostic Procedure with Diagnostic Trouble Code (DTC). >
< Refer to DTC B278A ABNORMAL IMMOBILIZER POWER SUPPLY , Diagnostic Procedure with Diagnostic Trouble Code (DTC). >
< Refer to DTC B2785 LIN COMMUNICATION ERROR , Diagnostic Procedure with Diagnostic Trouble Code (DTC). >
< Refer to DTC B2789 ID CODE BOX NO RESPONSE , Diagnostic Procedure with Diagnostic Trouble Code (DTC). >
< Refer to DTC B2790 ID CODE BOX ABNORMAL (EEPROM ABNORMAL) , Diagnostic Procedure with Diagnostic Trouble Code (DTC). >
Check the brake switch (except for MT model). < Refer to INSPECTION , Stop Light Switch. >
Check the clutch switch for MT model. < Refer to INSPECTION , Clutch Switch. >
Check the parking switch signal. < Refer to INSPECTION , AT Shift Lock Solenoid and "P" Range Switch. >
Check the DTC of the ECM.
Cannot register the immobilizer. Refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".
Engine does not start with the remote engine starter. < Refer to DTC B2779 REMOTE CONTROL ENGINE STARTER COMMUNICATION COLLATION NG , Diagnostic Procedure with Diagnostic Trouble Code (DTC). >