Diagnostic Procedure
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK VDCCM&H/U IDENTIFICATION SYMBOL. Check the identification symbol attached on the H/U. < Refer to SPECIFICATION , General Description. > |
Is the identification symbol correct? | Go to step 2 . | Replace the VDCCM&H/U. < Refer to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM&H/U) . > |
| 2 CHECK PARAMETER SELECTED IN VDCCM. < Refer to PARAMETER CHECK , OPERATION, Subaru Select Monitor. > |
Does the parameter registered in the VDCCM match the relevant vehicle? | Replace the VDCCM&H/U. < Refer to VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM&H/U) . > | Select and register the correct parameter. < Refer to PARAMETER SELECTION , OPERATION, Subaru Select Monitor. > |