It Does Not Function With Manual Operation (With Memory)

Step	Check	Yes	No
1 CHECK SEAT FUNCTIONS. Operate each power seat switch and check that each power seat function operates normally.	Does all function fail to operate?	Go to step 2 .	Check the motor which does not operate. < Ref. to SOME MOTORS DO NOT OPERATE (WITH MEMORY) , INSPECTION, Power Seat System. >
2 CHECK FUSE. Check the power seat fuse inside the fuse box.	Is the fuse blown out?	Replace the appropriate fuse.	Go to step 3 .
3 CHECK POWER SUPPLY CIRCUIT. Disconnect the power seat control module connector. Measure the voltage between harness connector and chassis ground. Connector & terminal (R388) No. 10 (+) - Chassis ground (-): (R389) No. 8 (+) - Chassis ground (-): (R389) No. 3 (+) - Chassis ground (-):	Is the voltage 10 V or more?	Go to step 4 .	Check body harness.
4 CHECK POWER SUPPLY CIRCUIT. Measure the resistance between power seat control module harness connector and chassis ground. Connector & terminal (R389) No. 14 - Chassis ground: (R389) No. 12 - Chassis ground:	Is the resistance less than 10 Ω?	Go to step 5 .	Check body harness.
5 CHECK IGNITION CIRCUIT. Measure the voltage between harness connector and chassis ground while turning the ignition switch to ON. Connector & terminal (R388) No. 11 (+) - Chassis ground (-):	Is the voltage 10 V or more?	Go to step 6 .	Check body harness.
6 CHECK TRANSMISSION CIRCUITS. Measure the resistance between harness connector and chassis ground under the following condition. AT/CVT model: Shift the select lever to "P" position. MT model: Pull parking brake lever. Connector & terminal (R388) No. 12 - Chassis ground:	Is the resistance less than 10 Ω?	Go to step 7 .	Check body harness.
7 CHECK SWITCH. Disconnect the connector of power seat switch assembly. Measure the resistance between connector terminals when moving the switch to reclining forward and reclining backward. < Ref. to CHECK POWER SEAT SWITCH , INSPECTION, Power Seat System. >	Is there any problem on the inspection result?	Replace the power seat control module.	Replace the power seat switch assembly.