LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks - Keyless Access (W/Push Button Start) (Diagnostics) >> Read Current Data >> List

Read Current Data: List

  1. Keyless access system
    Items to be displayed Unit of measure Content Note
    Driver's unlock touch sensor switch ON/OFF Keyless access CM input value ON when touch sensor is touched
    Passenger's unlock touch sensor switch ON/OFF Keyless access CM input value ON when touch sensor is touched
    Driver's lock touch sensor SW ON/OFF Keyless access CM input value ON when front lock button (lock) is touched
    Passenger's lock touch sensor SW ON/OFF Keyless access CM input value ON when front lock button (lock) is touched
    Rear Gate Request SW ON/OFF Keyless access CM input value ON when rear lock button is pressed (5 door models only)
    Trunk Request SW ON/OFF Keyless access CM input value ON when the trunk opener button is pressed (4 door models only)
    Secret code keyless registration Unregistered/Registered Keyless access CM input value Registered when secret code keyless registration
    IGN SW ON/OFF Keyless access CM input value ON when ignition is ON
    B/up fuse Connecting/Not connected Keyless access CM internal value When backup fuse is connected/connecting
    Incorrect vehicle ID Yes/No Keyless access CM internal value Yes when the access key is different when keyless access is performed
    No response Yes/No Keyless access CM internal value Yes when there is no response from the access key when keyless access is performed
    Incorrect response code, format Yes/No Keyless access CM internal value Yes if the response from the access key differs when keyless access is performed
    Exhausted battery Yes/No Keyless access CM internal value Yes if the access key battery is depleted
    Incorrect response code, ID code Yes/No Keyless access CM internal value Yes if the response from the access key differs when keyless access is performed
    Incorrect response code, collation result Yes/No Keyless access CM internal value Yes if the response from the access key differs when keyless access is performed
    Incorrect ID code Yes/No Keyless access CM internal value Yes if the response from the access key differs when keyless access is performed
    Incorrect rolling code Yes/No Keyless access CM internal value Yes if the response from the access key differs when keyless access is performed
    Smart Cancel Cancel/Normal Keyless access CM internal value Cancel in the keyless access function stopped condition
    Simple Smart system cancel Cancel/Normal Keyless access CM internal value Cancel in the simple cancel function set condition
    ID Code Box W/H Connection State Connecting/Not connected Keyless access CM internal value When ID code box is connected/connecting
    ID Code Box Existence Judging ON/OFF/Existence Judging Keyless access CM internal value  
    Immobilizer Set/Unset Keyless access CM internal value  
    Remote engine starter communication ID confirmation Collation NG/Collation OK Keyless access CM internal value  
    Remote engine starter code registration confirmation Unregistered/Registered Keyless access CM internal value  
    STLC sleep possible status Possible/Impossible Steering lock CM internal value  
    STLC wake-up transmission status Transmission/No transmission Steering lock CM internal value  
    Lock side sensor status ON/OFF Steering lock CM internal value  
    Unlock side sensor status ON/OFF Steering lock CM internal value  
    Lock confirmation Confirmed/Unconfirmed Steering lock CM internal value Confirmed when steering lock is locked
    Unlock confirmation Confirmed/Unconfirmed Steering lock CM internal value Confirmed when steering lock is unlocked
    Sensor initialization Completed/Not Completed Steering lock CM internal value  
    Motor protection control status Rejected range/Permitted range Steering lock CM internal value  
    Motor operation prohibition voltage evaluation ON/OFF Steering lock CM internal value  
    Diagnosis response Normal/Response Steering lock CM internal value  
    Sensor abnormal Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    Motor power supply short-circuit abnormal Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    Motor driver short-circuit abnormal Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    Lock bar engagement abnormal Normal/Abnormal Steering lock CM internal value ON when the steering lock bar has experienced interference
    Push start abnormal Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    Lock side relay operation Stopped/Activating Steering lock CM internal value  
    Unlock side relay operation Stopped/Activating Steering lock CM internal value  
    Motor drive FET drive Stopped/Activating Steering lock CM internal value  
    Motor reversal protection control Stopped/Activating Steering lock CM internal value  
    Engine start Engine start permission/Engine start prohibition Steering lock CM internal value Permission when ignition ON
    Sensor abnormal (past) Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    Motor power supply short-circuit abnormal (past) Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    Motor driver short-circuit abnormal (past) Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    Steering lock lock/unlock command reception history ON/OFF Steering lock CM internal value ON when steering lock is locked → unlocked, unlocked → locked
    Lock bar engagement abnormal (past) ON/OFF Steering lock CM internal value ON when the steering lock bar has experienced interference in the past
    Push start abnormal (past) Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    STLC Abnormal EEPROM access Normal/Abnormal Steering lock CM internal value Abnormal when a trouble occurs in steering lock CM
    ID code BOX sleep possible status Impossible/Possible Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box)  
    ID code BOX wake-up transmission status No transmission/Transmission Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box)  
    ID code BOX Abnormal EEPROM access (now) Normal/Abnormal Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box)  
    EGI code reception status Reception/Not yet received Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box) Reception at engine start operation
    Engine start permission request reception status Reception/Not yet received Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box) Reception at ignition ON
    Code collation result between smart ECM and ID code box Normal/Abnormal Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box) Normal when engine start is allowed
    Code collation result between steering locked ECM and ID code box Normal/Abnormal Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box) Normal when steering lock operation allowed
    Steering lock unlock request reception status Reception (keep 10 sec)/Not yet received Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box) Reception when steering lock is performing unlock
    Steering lock lock request reception status Reception (keep 10 sec)/Not yet received Keyless access CM internal value (models without ID code box) or ID code box internal value (models with ID code box) Reception when steering lock is performing lock
    Combination meter CU disruption information Normal/Abnormal Keyless access CM internal value
    (Display the reception value from body integrated unit)    		 Display "Abnormal" when DTC U122A is output from body integrated unit
    Engine CU disruption information Normal/Abnormal Keyless access CM internal value
    (Display the reception value from body integrated unit)    		 Display "Abnormal" when DTC U1221 is output from body integrated unit
    Transmission CU disruption information Normal/Abnormal Keyless access CM internal value
    (Display the reception value from body integrated unit)    		 Display "Abnormal" when DTC U1222 is output from body integrated unit
    Brake CU disruption information Normal/Abnormal Keyless access CM internal value
    (Display the reception value from body integrated unit)    		 Display "Abnormal" when DTC U1223 is output from body integrated unit
    Idling stop CU receive information Reception/Not yet received Keyless access CM internal value
    (Display the reception value from body integrated unit)    		 Fixed as "Not yet received" for vehicles without Auto Start Stop
    ID code registration mode status Normal/Regist./Deletion - For immobilizer registration
    Smart related ECM code registration mode status On mode/Normal
    ID code collation completion confirmation Completed/Normal
    ID code registration completion confirmation Completed/Normal
    Smart related ECM code registration completion confirmation Completed/Normal
    Registered smart key confirmation status Confirming/Normal
    Smart related ECM code confirmation status Confirming/Normal
    ID code registration status Registering/Normal
    ID code collation status Normal/Collating the immobilizer/Collating the smart
    All registered keys confirmation status Confirming/Normal
    Confirmed number of all registered keys 0 - 7
    Number of required registrations (smart) 0 - 7
    Number of collation completed (smart) 0 - 7
    Number of registration completed (smart) 0 - 7 Keyless access CM internal value Number of recognized keyless access CM
    ID Code Box Connecting/Not connected Keyless access CM internal value Connecting with ID code box normal connection
    Steering Lock ECM Connecting/Not connected Keyless access CM internal value Connecting with steering lock CM normal connection
    Driver's lock request SW/touch sensor switch ON edge record ON/OFF Keyless access CM internal value The display is continued when the collation is once established by the combination indicated on the left.
    NOTE: When confirming the data on the left, confirm after performing Keyless access system check. < Refer to KEYLESS ACCESS SYSTEM CHECK . >
    Passenger's unlock request SW/touch sensor switch ON edge record ON/OFF Keyless access CM internal value
    Rear gate lock request SW ON edge history ON/OFF Keyless access CM internal value
    Driver's unlock touch sensor switch ON edge record ON/OFF Keyless access CM internal value
    Passenger's unlock touch sensor switch ON edge record ON/OFF Keyless access CM internal value
    Trunk unlock request SW ON edge history ON/OFF Keyless access CM internal value
    Collation OK result history (driver's external transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (passenger's external transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (front interior transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (rear interior transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (trunk internal transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (trunk external transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (rear gate internal transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (rear gate external transmitter + interior tuner) ON/OFF Keyless access CM internal value
    Collation OK result history (immobilizer amplifier + immobilizer amplifier) ON/OFF Keyless access CM internal value
    Push start SW 1 ON/OFF Keyless access CM input value ON when push button start is pressed
    Push start SW 2 ON/OFF Keyless access CM input value ON when push button start is pressed
    Stop light SW ON/OFF Keyless access CM input value ON when brake pedal is depressed
    Steering unlock SW ON/OFF Keyless access CM input value OFF when steering locked
    Shift P signal(AT only) ON/OFF Keyless access CM input value ON when the shift position is "P"
    Neutral SW/Clutch SW ON/OFF Keyless access CM output value ON when the shift position is at "P" or "N" (AT vehicle)
    ON when clutch pedal is depressed (MT vehicle)
    Shift N signal(AT only) ON/OFF Keyless access CM input value ON when the shift position is "N"
    Delivery mode signal(AT only) ON/OFF Keyless access CM input value  
    IGN2 relay monitor (drive output) ON/OFF Keyless access CM output value ON during IG relay 2 (push button start) drive output
    IGN1 relay monitor (drive output) ON/OFF Keyless access CM output value ON during IG relay 1 (push button start) drive output
    ACC relay monitor ON/OFF Keyless access CM output value ON during accessory relay (push button start) drive output
    IGN2 relay monitor (coil voltage) ON/OFF Keyless access CM output value ON during IG relay 2 (push button start) drive output
    IGN1 relay monitor (coil voltage) ON/OFF ON during IG relay 1 (push button start) drive output ON during IG relay 1 (push button start) drive output
    IGN latch monitor ON/OFF Keyless access CM output value ON during IG relay 2 (push button start) drive output
    STSW signal monitor ON/OFF Keyless access CM output value ON when brake pedal (except MT model) or clutch pedal (MT model) is depressed, and push button ignition switch is pressed
    ACCR signal ON/OFF Keyless access CM input value ON during starter relay drive output
    Vehicle speed signal Drive status/Stop status Keyless access CM input value Drive status when vehicle speed is input
    Engine Speed Rotating/Stopped Keyless access CM input value Rotating when engine driven
    Power supply status All OFF status Keyless access CM output value Displayed when IG relay 1 (push button start), IG relay 2 (push button start), and accessory relay (push button start) are all OFF
    ACC relay ON status Keyless access CM output value Displayed when accessory ON
    IGN1 relay ON status Keyless access CM output value Displayed when ignition ON
    IGN2 relay ON status Keyless access CM output value Displayed when ignition ON
    STSW Condition Keyless access CM output value Displayed when brake pedal (except MT model) or clutch pedal (MT model) is depressed, and push button ignition switch is pressed
    Vehicle identification GAS MT/GAS AT/HEV AT/Auto Start Stop MT/Auto Start Stop AT Keyless access CM output value Equipped vehicle is displayed.
    IGN1 external circuit abnormal No/Yes Keyless access CM output value  
    IGN2 external circuit abnormal No/Yes Keyless access CM output value  
    Start SW trouble No/Yes Keyless access CM output value  
    P signal mismatch No/Yes Keyless access CM output value  
    Steering lock unlock waiting time out No/Yes Keyless access CM output value  
    Key collation waiting time out No/Yes Keyless access CM output value  
  2. Body integrated unit

    Refer to the BODY CONTROL SYSTEM (DIAGNOSTICS) for the current data of the body integrated unit. < Refer to LIST , Read Current Data. >

scientia non olet · About LEMON Manuals