LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> SUBARU Eyesight System (Driver Assist) (Diagnostics) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC B28A2 Adaptive Cc ECM Communication Data Error >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC PROCEDURE

Step Check Yes No
1 CHECK LAN SYSTEM. 
Perform the diagnosis for LAN system. < Refer to PROCEDURE , Basic Diagnostic Procedure. >		 Is DTC displayed? Perform the diagnosis according to DTC. Go to step 2  .
2 CHECK VDC. 
Perform the diagnosis for VDC. < Refer to PROCEDURE , Basic Diagnostic Procedure. >		 Is DTC displayed? Perform the diagnosis according to DTC. Go to step 3  .
3 CHECK CONNECTOR. 
Check the VDC connector and the stereo camera connector.		 Is the connector OK? Go to step 4  . Repair or replace the connector.
4 CHECK STEREO CAMERA. 
Read the DTC.		 Is another DTC displayed? Perform the diagnosis according to DTC. Go to step 5  .
5 CHECK STEREO CAMERA. 
  1. Clear the memory.
  2. Read the DTC.
 Is the same DTC displayed? Replace the stereo camera. < Refer to REMOVAL , Stereo Camera. > Temporary poor contact.
scientia non olet · About LEMON Manuals