Function Check: Operation
NOTE:
In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.
- On «Main Menu» display, select {Each System Check}.
- On «System Selection Menu» display, select {Integ. unit mode}.
- On «Integ. unit mode failure diag.» display, select {Function check}.
- Select an item to be operated on «Function check» display, and press the [OK] button.
- Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.NOTE:
- If not equipped (based on area or condition), process will not go on.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".