LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (M/T Clutch System) >> Operating Cylinder >> Removal

Operating Cylinder: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Clutch fluid spilled on the vehicle body will harm the paint surface; wash it off with water and wipe clean quickly if spilled.
  1. Remove the air intake boot assembly. Refer to REMOVAL .
  2. Disconnect the clutch hose from the operating cylinder.
    CAUTION: Cover the hose joint to prevent the clutch fluid from flowing out.
    Fig 1: Identifying Clutch Hose And Operating Cylinder
    G08582200Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the operating cylinder from the transmission.
    Fig 2: Locating Operating Cylinder Bolts
    G08581908Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals