LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Entertainment System) >> GPS Antenna >> Removal

GPS Antenna: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the center panel. < Refer to CENTER PANEL , REMOVAL, Center Console. >
  3. Remove the navigation body. < Refer to PROCEDURE , Navigation Body. >
  4. Disconnect the connector (green) of GPS antenna.
    Fig 1: Identifying GPS Antenna Connector
    G07681367Courtesy of SUBARU OF AMERICA, INC.
    NOTE:

    Attach a string of about 50 cm in length, etc. to the GPS antenna connector for easy installation work.

  5. Remove the combination meter assembly. < Refer to REMOVAL , Combination Meter. >
  6. Remove the screw and harness clamp to remove the GPS antenna.
    Fig 2: Identifying GPS Antenna Screw And Harness Clamp
    G07681368Courtesy of SUBARU OF AMERICA, INC.
    NOTE:

    When the GPS antenna harness connector is pulled out, remove the string attached to the connector in step  4).