LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Power Steering System) >> Steering Wheel >> Removal

Steering Wheel: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Set the tire to the straight-ahead position.
  3. Remove the airbag module. < Refer to REMOVAL , Driver's Airbag Module. >
    WARNING: Always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM" before performing service on the airbag module. < Refer to CAUTION , General Description. >
  4. Place alignment marks on the steering wheel and steering shaft.
    Fig 1: Identifying Alignment Marks On Steering Wheel And Steering Shaft
    G08565751Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the steering wheel nut, and then draw out the steering wheel from shaft using steering puller.
    CAUTION: When removing, always use the steering wheel puller to avoid deforming the steering wheel.
scientia non olet · About LEMON Manuals