LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Fuel Injection System (H4DO)) >> Electronic Throttle Control Relay >> Removal

Electronic Throttle Control Relay: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
    Fig 1: Connecting/Disconnecting Battery Ground Terminal
    G08570271Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the glove box lower cover. < Refer to REMOVAL , Glove Box. >
  3. Remove the electronic throttle control relay from the relay block on the back side of the glove box.
    Fig 2: Locating Electronic Throttle Control Relay
    G08562702Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals