LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Diagnostics) (H4DO) >> Drive Cycle >> Procedure >> Drive Cycle J >> Diagnostic procedure

Diagnostic procedure

  1. Idle the engine for 15 minutes or more.
  2. Turn the ignition switch to OFF.
  3. After 10 hours passed from the start of step  2), read the temporary code using the Subaru Select Monitor or general scan tool. Refer to OPERATION .
scientia non olet · About LEMON Manuals