LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Controls (Diagnostics) (H4DOTC)) >> Diagnostics for Engine Starting Failure >> Procedure

Diagnostics for Engine Starting Failure: Procedure

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
1. Check for fuel amount.
↓
2. Inspection of starter motor circuit. < Refer to STARTER MOTOR CIRCUIT , Diagnostics for Engine Starting Failure. >
↓
3. Inspection of ECM power supply and ground line. < Refer to CHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM) , Diagnostics for Engine Starting Failure. >
↓
4. Inspection of ignition control system. < Refer to IGNITION CONTROL SYSTEM , Diagnostics for Engine Starting Failure. >
↓
5. Inspection of fuel pump circuit. < Refer to FUEL PUMP CIRCUIT , Diagnostics for Engine Starting Failure. >
↓
6. Inspection of fuel injector circuit. < Refer to FUEL INJECTOR CIRCUIT , Diagnostics for Engine Starting Failure. >
scientia non olet · About LEMON Manuals