LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester XT Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Reduction Driven Gear >> Disassembly

Reduction Driven Gear: Disassembly

  1. Remove the snap ring from reduction driven gear.
    Fig 1: Removing Snap Ring From Reduction Driven Gear Using Plier
    G08564030Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing from reduction driven gear using ST.

    ST 498077600 REMOVER

    Fig 2: Removing Ball Bearing From Reduction Driven Gear Using Special Tool
    G08564031Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the gear inner groove snap ring from the reduction driven gear.
scientia non olet · About LEMON Manuals