LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester XT Premium >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the left rear quarter trim. < Refer to REMOVAL , Rear Quarter Trim. >
  3. Disconnect the keyless entry control module harness connector.
  4. Remove the bolt and then remove the keyless entry control module.
    Fig 1: Identifying Keyless Entry Control Module Connector
    G05957972Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals