Shift Control

1. Turn the ignition switch to ON.
2. While brake pedal is not depressed, check if the select lever does not move from "P" range.
3. While brake pedal is depressed, check if the select lever moves from "P" range.
4. Set the select lever to other than "P" range.
5. When the ignition switch is turned to OFF, check if the ignition key switch cannot be removed.
6. Set the AT selector lever to each gear position while checking that the demanded gear position is correctly attained.
   Fig 1: Checking AT Shift Control Shifting

   Courtesy of SUBARU OF AMERICA, INC.

Check for smooth operation to each position.