Pre-Delivery Inspection (PDI) Procedure: Notes

Perform the procedures indicated in the table below.

Step	Check point
1. Appearance	If the vehicle is covered with protective coating, visually check the vehicle body for damage and dents. If the protective coating has been removed, visually check the painted body surfaces in detail for damage or rust. Visually check the glass and light lenses for any damage, cracks or excessive gaps between body panels. Visually check the exterior parts for any damage. Check the instrument panel, console and trim for stains or dirt.
2. Tire	Check the tires for damage, defective, and dents on wheels. Check the tire air pressure.
3. Fuses	If the vehicle is about to be delivered to customer, attach the room light fuse.
4. Lock/unlock and open/close operation checks of doors.	Using the key, check the door can be locked or unlocked normally. Open and close all doors to check that there are no problems. Operate the power door lock switch to check that all doors and the rear gate lock and unlock normally.
5. Child safety lock	Check the child safety lock system operates normally.
6. Rear gate Lock/Unlock and open/close operations	Open and close the rear gate to check that there are no problems. Check if the rear gate can be unlocked normally through the emergency hole. Operate the power door lock switch to check that all doors and the rear gate lock and unlock normally.
7. Fuel filler lid opener lever	Operate the fuel filler lid opener to check that the fuel filler lid unlocks normally.
8. Towing hook (eyebolt)	At factory shipment, the towing hook (eyebolt) is installed to the rear bumper. Remove the towing hook (eyebolt), store it in the holder.
9. Accessory	Check that the following accessories are equipped. Owner's manual Warranty booklet Maintenance note Spare key Key No. plate Jack Tool set Spare tire Towing hook (eyebolt) Security ID plate
10. Front hood lock release system	Operate the front hood lock release lever to check that the front hood opens normally.
11. Battery	Check the battery for any abnormal conditions such as rust or traces of battery fluid leaks.
12. Brake fluid	Check the brake fluid amount.
13. Engine oil	Check the engine oil amount.
14. Transmission gear oil	Check that the transmission gear oil level is normal.
15. AT front differential gear oil	Check for leakage of AT front differential gear oil.
16. Rear differential gear oil	Check for leakage of gear oil from the rear differential.
17. Engine coolant	Check the engine coolant level.
18. Clutch fluid	Check the clutch fluid amount.
19. Window washer fluid	Check the window washer fluid amount.
20. Front hood latch	Check that the front hood is closed normally and locked securely.
21. Keyless entry system	Check that the keyless entry system operates normally.
22. Security system (Alarm system)	Check that the security system (alarm system) operates normally.
23. Seat	Check the seat surfaces for stains or dirt. Check the seat installation conditions and functionality. Check that the occupant detection system for passenger's seat operates normally.
24. Seat belt	Check the seat belt installation conditions and functionality. Check the seat belt warning system operates normally.
25. TPMS (U.S. model)	Turn the TPMS transmitter power supply to ON. If the display of TPMS warning light does not operate normally, perform the diagnosis by referring to TPMS (Diagnosis).
26. ECM protector	For Canada model, check the ECM protector installation conditions.

Step	Check point
27. Delivery (test) mode connector	Check that the delivery (test) mode connector is separated.
28. Immobilizer system	Check that the engine starts with all keys that are equipped on vehicle. 60 seconds after turning ignition switch from ON to ACC or OFF, or immediately after removing the key, check that the security indicator light is blinking.
29. Starting condition	Start the engine and check that the engine starts smoothly.
30. Exhaust system	Check that the exhaust noise is normal and no leaks are found.
31. Indicator and warning lights	Check that all indicator lights and warning lights are operating correctly.
32. Heater & ventilation	Check that the heater & ventilation system operates normally.
33. Air conditioner	Check that the air conditioner operates normally.
34. Clock	Check that the clock operates normally.
35. Antenna	Install the antenna.
36. Audio	Check the radio and AUX operate normally.
37. Accessory power supply socket	Check that the accessory power supply socket operates normally.
38. Lighting system	Check that the lighting system operates normally.
39. Window washer	Check that the window washer system operates normally.
40. Navigation system	Check all display functions for normal operation. Check that the navigation and AUX systems operate normally.
41. Wiper	Check that the wiper system operates normally.
42. Power window operation check	Check that the power window operates normally.
43. Sunroof	Check that the sunroof operates normally.
44. Rear defogger system	Check that the rear defogger system operates normally.
45. Door mirror	Check that the remote control door mirror operates normally.
46. Parking brake	Check the parking brake for normal operations.

Step	Check point
47. Brake test	Check the foot brake for normal operations.
48. Shift control	Check that the AT and MT shift normally.
49. Cruise control	Check that the cruise control system operates normally.

Step	Check point
50. ATF level	Check that the ATF level is correct.
51. Power steering fluid level	Check that the power steering fluid level is normal.
52. Fluid leakage	Check for fluid/oil leaks.
53. Water leakage	Spray the vehicle with water and check for water leaks.
54. Appearance 2	Remove the protective coat. (If attached) Check the body paints for damage and stain. Visually check the exterior parts for any damage and rust.