LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Forester X, Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> General Information >> Periodic Maintenance Services >> Tire Rotation >> Inspection

Tire Rotation: Inspection

  1. When the tread has worn down to less than 1.6 mm (0.063 in) or the wear indicator appears across the tread, replace the tire. (Replace the right and left tire as a set.)
    Fig 1: Identifying Tread Wear Indicator, New And Damaged Tread
    G08570092Courtesy of SUBARU OF AMERICA, INC.
  2. If the tire appears to be worn unevenly, adjust the wheel alignment.
  3. Next, make a tire rotation between front and rear as shown in the figure, make sure tires are worn evenly.
    • When the direction of tire rotation is not specified
      Fig 2: Rotating Tires (When Direction Of Tire Rotation Is Not Specified)
      G08570093Courtesy of SUBARU OF AMERICA, INC.
    • When the direction of tire rotation is specified
      Fig 3: Rotating Tires (When Direction Of Tire Rotation Is Specified)
      G08570094Courtesy of SUBARU OF AMERICA, INC.