LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Premium, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Entry Start System Entry System (Keyless Entry)) >> Entry & Start System (Entry Function) >> DTC Check/Clear

DTC Check/Clear

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC
    1. Connect the SSM4 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM4 on.
    4. Enter the following menus: [Keyless Access(Collation ECM)] →[DTC]
    5. Check for DTCs.
  2. CLEAR DTC
    1. Connect the SSM4 to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the SSM4 on.
    4. Enter the following menus: [Keyless Access(Collation ECM)] →[DTC] →[Clear Memory]
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals