Vacuum Sensor ASSY (FA20): Installation
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of air pressure sensor ASSY
- Attach a new O-ring to the air pressure sensor ASSY.
- Apply engine oil to the O-ring.
- Using bolt, install the air pressure sensor ASSY. (Transmission A/T)
Standard value: T=4.0N.m {41kgf.cm} {3.0 ft.lbf} (Transmission A/T)
T=3.4N.m {35kgf.cm} {2.5 ft.lbf} (Transmission M/T)
- Connect the connector for air pressure sensor ASSY.
- Installation of engine cover SUB-ASSY No. 1 (Refer to INSTALLATION , Step 6)
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}