Circuit description
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
If any of the following operations are performed, the collation ECM (smart key ECM ASSY) receives a signal and changes the power mode.
- When the electrical key transmitter SUB-ASSY is in the vehicle interior, press the engine switch.
- When the transmitter battery of the electrical key transmitter SUB-ASSY is drained, depress the brake pedal *1 or the clutch pedal *2, and hold the electrical transmitter SUB-ASSY up to the engine switch.
- If the entry cancel function has been customized, while depressing the brake pedal *1 or the clutch pedal *2, hold the electrical key transmitter SUB-ASSY up to the engine switch.
*1: With automatic transmission
*2: Manual transmission
NOTE:
If you remove and then reconnect the battery cable, the power returns to the power mode it was before you removed the cable.
SYMPTOM DESCRIPTION - RELATED (DATA MONITOR) AND (ACTIVE TEST)
| Symptoms | [Data monitor] item | [Active Test] item |
|---|---|---|
| The power mode does not switch to on (IG) or to on (ACC). | Power supply
Engine
|
- |