LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Premium, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Entry Start System Start System (Keyless Start)) >> Entry & Start System (Start Function) >> The Power Does Not Turn ON (Power Status Changes To ACC ON But Not To IG ON) >> Circuit description

Circuit description

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

With the electrical key transmitter SUB-ASSY in the vehicle interior, press the engine switch. The collation ECM (smart key ECM ASSY) receives the signal and the power mode changes.

NOTE: If you remove and then reconnect the battery cable, the power returns to the mode it was before you removed the cable.
scientia non olet · About LEMON Manuals