Diagnosis System
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Description of functions
- Entry and start system (for start function) data and the Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the SSM4 to check for malfunctions and perform repairs.
- Check DLC3
- Check DLC3.
- INSPECT BATTERY VOLTAGE
- If the voltage is below 11V, recharge or replace the battery before proceeding.
Standard voltage: 11 to 14V
- If the voltage is below 11V, recharge or replace the battery before proceeding.