Front Shock Absorber: Disposal
WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Disposal of shock absorber ASSY FR LH
- Secure the shock absorber ASSY FR LH in a vertical position.
- Press down on the piston rod with hands by approximately 70mm {2.756in}.
- Using a saw, etc., slowly make a hole in the section shown in the figure to purge the gas.CAUTION:
- Wear protective eye wear.
- Since the gas pressure may spray metal chips, perform the procedure by covering the saw with a piece of cloth, etc.
NOTE: Gas to be released is colorless, odorless, and harmless.