LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Steering Column) >> Steering Wheel >> Installation

Steering Wheel: Installation

WARNING: This page is about a different car, the 2019 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Confirm that the front tires are in the straight-ahead position.
  2. Steering roll connector centering (Refer to INSTALLATION )
  3. Installation of steering pad switch (Refer to STEERING PAD SWITCH )
  4. Installation of the cruise control main switch (Refer to INSTALLATION )
  5. Installation of the transmission shift switch (with paddle shifter) (Refer to INSTALLATION )
  6. Installation of the steering wheel ASSY
    1. Line up the alignment marks and install the steering wheel ASSY onto the steering column ASSY.
    2. Install the nut.

      Standard value: T=39N.m {398kgf.cm} {28.8ft.lbf}

    3. Connect each connector to the steering roll connector.
  7. Installation of the driver's airbag module (Refer to INSTALLATION )
  8. Connection of the battery ground terminal Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
  9. Confirm the steering wheel ASSY center position.
  10. Inspection of airbag warning light (Refer to AIRBAG WARNING LIGHT ILLUMINATION PATTERN )
  11. VDC sensor mid point setting (Refer to WORK SUPPORT )
scientia non olet · About LEMON Manuals