Chamber (FA20): Installation

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.

Chamber ASSY installation
1. Install the chamber ASSY with the hose clamp.
  Standard value: T=2.0N.m {20kgf.cm} {1.5ft.lbf}
Duct installation
1. Install the duct and chamber ASSY as a unit with the two bolts.
  Standard value: T=6.0N.m {61kgf.cm} {4.4ft.lbf}
2. Install the duct with the hose clamp.
  Standard value: T=2.0N.m {20kgf.cm} {1.5ft.lbf}

Hose installation

Engage the two clamps and install the hose.

Insert the hose until the flange at the hose end contacts the grommet.

Courtesy of SUBARU OF AMERICA, INC.

CAUTION: When inserting the hose end, insert the hose so that the grommet rubber is not engulfed to avoid water leakage.

Courtesy of SUBARU OF AMERICA, INC.

Make sure from the passenger room side that the hose end is inserted properly.
Connect the hose and install the hose.