Alternator (FA20): Installation
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of the alternator ASSY
- Install the alternator ASSY in place with the two bolts.
Standard value: T=25N.m {255kgf.cm} {18.4ft.lbf}
- Connect the connector.
- Connect the wiring harness to the B: terminal with a nut.
Standard value: T=15.5N.m {158kgf.cm} {11.4ft.lbf}
- Install the terminal cap.
- Install the alternator ASSY in place with the two bolts.
- Installation of V-belt
(Refer to INSTALLATION )
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}