LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Lighting System (Exterior)) >> Lighting System >> Precautions

Lighting System: Precautions

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Precautions for replacing each light's bulb.
    1. If you leave a bulb out for a long time after removal, debris or dampness may enter the lens. Therefore, replace the bulb after preparing a new bulb.
    2. Be sure to replace the bulb with one of the same standard and wattage.
    3. Replacing only one bulb may create a difference in the brightness and color of the light emitted from the left and right side.
    4. Improper installation in the socket can cause cloudiness or water to enter to the lens, so after replacing the bulb, securely install it.
  2. Precautions during headlight beam adjustment
    1. If using a cover when the headlights are on, do not perform for 3 minutes or more.
    2. Because the headlight outer lens is made of plastic, performing the adjustment for a long time will cause heat that may cause disfiguration.
  3. Precautions when handling head light auto leveling
    1. The initialization procedure is necessary when removing, installing, or replacing the height control sensor RR LH, when performing a procedure that changes the height of the vehicle, such as replacing the suspension, and when replacing the headlight leveling computer ASSY
      NOTE: Refer to AUTO LEVELING SYSTEM  for initialization.
    2. When repairing or replacing the suspension, be sure to do so after removing the height control sensor RR LH.
scientia non olet · About LEMON Manuals