LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Lighting System (Exterior)) >> Height Control Sensor >> Removal

Height Control Sensor: Removal

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Removal of the height control sensor RR LH
    1. Disconnect the connector.
    2. Remove 3 nuts and remove the height control sensor RR LH.
      CAUTION: If you drop the height control sensor RR LH, replace it with a new one.
      G12595330Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals