Height Control Sensor: Installation
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of the height control sensor RR LH
- Align the guide to the position in the figure, and install the height control sensor RR LH with 3 nuts.
Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
- Connect the connector.
- Align the guide to the position in the figure, and install the height control sensor RR LH with 3 nuts.
- Initialization of the headlight leveling computer (Refer to AUTO LEVELING SYSTEM )
- Headlight beam adjustment (Refer to ADJUSTMENT )