LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Lighting System (Exterior)) >> Auto Leveling System >> Precautions

Auto Leveling System: Precautions

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Precautions during headlight beam adjustment
    1. If using a cover when the headlights are on, do not perform for 3 minutes or more.
    2. Because the headlight outer lens is made of plastic, performing the adjustment for a long time will cause heat that may cause disfiguration.
  2. Precautions when handling models with head light auto leveling
    1. The initialization procedure is necessary when removing, installing, or replacing the height control sensor RR LH, when performing a procedure that changes the height of the vehicle, such as replacing the suspension, and when replacing the headlight leveling computer ASSY.
      NOTE: Refer to AUTO LEVELING SYSTEM  for initialization.
    2. When repairing or replacing the suspension, be sure to do so after removing the height control sensor RR LH.
scientia non olet · About LEMON Manuals