Function Inspection
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Before troubleshooting
- Basic inspection
- Inspect the battery voltage.
Standard value: 11 to 14 V (when the engine is stopped)
- Inspect the battery voltage.
- Inspect for blown fuses, wiring harnesses open circuit, short circuits, and poor contact of connectors, in places where you can inspect visually.
- Basic inspection
- Inspection of the headlight auto leveling
- In IG ON, with the light control switch in the HEAD position and the vehicle stopped, change the vehicle posture. Maintain that status for 3 seconds or more, and check that the beams move.CAUTION: Change the vehicle height slowly.
- In IG ON, with the light control switch in the HEAD position and the vehicle stopped, change the vehicle posture. Maintain that status for 3 seconds or more, and check that the beams move.