Unit Inspection
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Check of select lever ASSY
- Measure the resistance between the terminals.
Resistance
Inspection terminals Inspection conditions (shift position) Standard value 1 - 3 Select lever in any other than P position Less than 1 Ω 2 - 3 Select lever in P position 8 - 9 When select lever is in M position and shifted to "+" 10 - 11 Select lever in M position 12 - 13 When select lever is in M position and shifted to "-" 1 - 3 Select lever in P position 10 k Ω or more 2 - 3 Select lever in any other than P position 8 - 9 Except when select lever is in M position and shifted to "+" 10 - 11 Select lever in any other than M position 12 - 13 Except when select lever is in M position and shifted to "-" - Check of shift lock solenoid ASSY