Unit Inspection
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Check of neutral start switch ASSY
- Measure the resistance between the terminals.
Resistance
Inspection terminals Inspection conditions Standard value 2(RB) - 6(PL) 4(B) - 5(L) Select lever in P position Less than 1 Ω 2(RB) - 1(RL) Select lever in R position Less than 1 Ω 2(RB) - 9(NL) 4(B) - 5(L) Select lever in N position Less than 1 Ω 2(RB) - 7(DL) - Select lever in D position
- When select lever is in M position and shifted to "+" or "-"
Less than 1 Ω 2(RB) - 6(PL) 4(B) - 5(L) Select lever in any other than P position 10 kΩ or more 2(RB) - 1(RL) Select lever in any other than R position 10 kΩ or more 2(RB) - 9(NL) 4(B) - 5(L) Select lever in any other than N position 10 kΩ or more 2(RB) - 7(DL) - Select lever in any other than D position
- Except when select lever is in M position and shifted to "+" or "-"
10 kΩ or more