LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Meter / Gauge System) >> Light Control Rheostat >> Installation

Light Control Rheostat: Installation

WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation of the light control rheostat
    1. Engage two claws and install the light control rheostat.
  2. Installation of the instrument panel under cover SUB-ASSY NO. 1
    1. Connect the connector.
    2. Engage four claws and four clips, and install the instrument panel under cover SUB-ASSY NO. 1.
    3. Install the 2 screws.
  3. Installation of the instrument side panel LH (Refer to INSTALLATION )
scientia non olet · About LEMON Manuals